Carmanhaas Fiber cutting optyske komponinten wurde brûkt yn ferskate soarten glêstried laser cutting holle, transmitting en fokusje de beam útfier fan de glêstried te berikken it doel fan cutting it blêd.
(1)Ymporteare kwartsmateriaal mei ultra lege absorption
(2)Surface accuracy: λ/5
(3)Stromgebrûk: Oant 15000W
(4)Ultra-lege absorption coating, absorption rate <20ppm, lange libben tiid
(5)Aspherical oerflak finish krektens oant 0.2μm
| Spesifikaasjes | |
| Substraat Materiaal | Fusearre Silica |
| Dimensionale tolerânsje | +0.000"-0.005" |
| Dikte Tolerânsje | ± 0.005" |
| Sphere Power | 3franjes |
| Sphere irregularity | 1 frje |
| Oerflak kwaliteit | 10-5 |
| Clear diafragma (polijst) | ≥90% |
| Effektive Focal Length (EFL) Tolerânsje | < 1,0% |
| Spesifikaasjes | |
| Standert Twa kanten AR coating @1070nm | |
| Totale absorption | <30 PPM |
| Oerdracht | >99.9% |
| Ultra Low-absorbing AR / AR coating @ 1070nm | |
| Totale absorption | < 10 PPM |
| Oerdracht | >99.9% |
| Diameter (mm) | Brandpuntslingte (mm) | Coating |
| 25.4 | 75 | AR/AR @ 1030-1090nm |
| 25.4 | 100 | AR/AR @ 1030-1090nm |
| 28 | 75 | AR/AR @ 1030-1090nm |
| 28 | 100 | AR/AR @ 1030-1090nm |
| 30 | 75 | AR/AR @ 1030-1090nm |
| 30 | 100 | AR/AR @ 1030-1090nm |
| 37 | 100 | AR/AR @ 1030-1090nm |
| Diameter (mm) | Brandpuntslingte (mm) | Coating |
| 25.4 | 125 | AR/AR @ 1030-1090nm |
| 28 | 125 | AR/AR @ 1030-1090nm |
| 30 | 125 | AR/AR @ 1030-1090nm |
| 30 | 150 | AR/AR @ 1030-1090nm |
| 30 | 200 | AR/AR @ 1030-1090nm |
| 37 | 150 | AR/AR @ 1030-1090nm |
| 37 | 200 | AR/AR @ 1030-1090nm |
| 38.1 | 200 | AR/AR @ 1030-1090nm |
Noat:as jo oare diameter en fokale lingte nedich binne, nim dan kontakt op mei ús ferkeap.
